Nas Mappings (Replication); Source And Target Share Details - HPE StoreOnce 6500 User Manual

7. All slots in the Target Library are selected by default, but you can deselect any cartridges that you do
not want to be recovered to the Source Library by checking the Pending One off Recovery box.
8. Click Next to display the Summary page.
9. Click Apply to run reverse replication.
As soon as reverse replication completes for each slot, the data may be recovered to the host using
the original backup application. This can take time because ALL the data must reverse replicate over
the WAN link.
New backups can now run to the Source Appliance and replication will run normally without further
configuration.

NAS Mappings (Replication)

This page displays details of all replication mappings between source and target shares. Administrator
users may use the two wizards on this page to configure replication mappings and recover mappings
after a disaster. (VT library mappings are managed on a separate page.) If a non-replicating share is
selected, no mappings are configured and the screen displays the Replication and Recovery Wizards.
Use this page to:
• View source and target share mappings (all users). See Source and target share details on page
69.
Administrator users may also remove share mappings and edit share mappings.
• Run the Replication Wizard to create new share mappings (administrator users only). See Running
the replication wizard (NAS) on page 72.
• Run the Replication Recovery Wizard to recover share mappings. See Recovering a source
appliance (NAS shares) on page 73.
NOTE: Only administrators can manage mappings. You can only map and replicate deduplicating shares
and map shares of the same version.

Source and target share details

The top half of the NAS Mappings page contains a list of all available NAS shares that were configured
on this StoreOnce System.
• Non Replicating: a share on this StoreOnce System that has not yet been mapped for replication.
Replication and Recovering Wizards are available only with non-replicating shares.
• Replication Source: a share on this StoreOnce System that has been mapped for replication.
• Replication Target: a share on this StoreOnce System that has been replicated from a Replication-
Source share.
NAS Mappings (Replication) 69