HPE StoreOnce 6500 User Manual page 110

Table 35: Outbound copy job fields
Field
Item Name
Status
Status Information Status information. This will be a — unless the job has been cancelled or
Percent Complete
Client Identifier
Client Address
Application
Identifier
Queued Time
Started Time
Stopped Time
Estimated
Completion Time
Target Appliance
Target Store
Target Item Name
110 StoreOnce Catalyst functions
Description
The name of the item being copied from the outbound copy job. This name is
created by the backup application.
The status of the outbound copy job, which may be Queued, Paused, Running,
Cancelled, or Completed. If the status information displays —, no further
information is available.
NOTE: The backup application must be configured to tidy up any incomplete or
orphaned items before retrying the job.
paused.
See System information messages on page 115 for more information about
events that may cause a job to be cancelled or paused.
The percentage of the copy job that has been completed.
The client that initiated the outbound copy job. The client name is defined in the
backup application.
Displays the IP address if the job was over Ethernet or the World Wide Port
Name/World Wide Node Name if the job was over Fibre Channel of the server
that created the item.
The name of the application that created the item.
The time the copy job was queued.
The time the copy job was started.
The time the job ended.
The estimated completion time, if the copy job is still running.
The address of the target server. The target is the Service Set on the other
StoreOnce System to which the job is being copied from the Service Set on this
StoreOnce System. All target details are specified by the backup application
when the outbound copy job is created.
The name of the target store on the StoreOnce System to which the job is being
copied.
The name of the target item on the StoreOnce System to which the job is being
copied. All item names are defined by the backup application.
Table Continued