Click Reset if you need to change the dates.
8. The resulting graphs show data points for the selected time period. The x axis shows date and time
stamps, and the y axis shows bytes, KB, or MB, depending on the maximum value of Fibre Channel
receive and transmit utilization during the selected time period.
You can export the graphs; see Exporting Reporting Central reports on page 147 for details.
Email Report Scheduler
The Report Scheduler allows you to receive reports on read/write throughput, replication throughput, and
storage capacity at the service set level. You schedule the intervals for receiving the reports.
More information
Adding an email report on page 164
Modifying an email report on page 165
Deleting an email report on page 165
Adding an email report
Procedure
1. Navigate to Reporting Central > Reports > Scheduler.
2. Click Add.
3. Complete the following information:
a. Enter the report name.
b. Select the report type.
c. Select the time period.
d. Select the appliance.
e. Select the service set.
f. Enter comments (optional).
g. Enter the email subject line.
h. Enter the email recipients.
i. Select the frequency of the report.
j. Select the number of minutes past the hour to run the report.
k. Select the starting and ending dates of the report schedule.
4. Click OK.
5. The report schedule is added to the Email Report Scheduler list.
164
Email Report Scheduler