Editing A Recipient; Deleting A Recipient; Email - HPE StoreOnce 6500 User Manual

a. Select IPv4 (default), IPv6, or Domain Name.
b. Enter the IP address.
c. Edit the port number if appropriate (optional).
The default is 514.
d. Select the protocol type.
e. Select the log type.
The default is Audit.
f. Click OK.
The recipient is added to the Log Export Recipient List.

Editing a recipient

Procedure
1. On the Log Export page, select the recipient to edit.
2. Click Edit.
3. In the Edit Recipient window, edit the information as necessary.
4. Click OK.
The recipient is updated in the Log Export Recipient List.

Deleting a recipient

Procedure
1. On the Log Export page, select the recipient to delete.
2. Click Delete.
3. In the Delete Recipient confirmation window, click Yes.
The recipient is deleted from the Log Export Recipient List.

Email

Select Email from the Device Configuration menu item to display the current email setup.
The Email Setup page displays the current configuration for sending out event notifications via email. This
includes information needed to route the email (SMTP server), as well as the association of events with
destination email addresses. A single event can generate a notification to multiple email addresses. Also,
different sets of events can generate notifications to different email addresses.
To configure email settings
1. From the Navigator, select Device Configuration > Email.
2. Click Configure.
3. Enter the appropriate information.
176 Editing a recipient