Selecting The Authentication Mode; User Authentication Mode; Creating A Local User On The Storeonce Cifs Server - HPE StoreOnce 6500 User Manual

• A user account on the server running DNS to add entries.
• The system time on the StoreOnce System must be correct and in sync with the domain controller. To
synchronize with a time server to ensure accurate time keeping, use the StoreOnce CLI time
commands on the StoreOnce System. See the StoreOnce System CLI Reference Guide for details.

Selecting the authentication mode

Procedure
1. Navigate to the StoreOnce > NAS > CIFS Server tab.
2. Select the service set for which the authentication mode needs modification
3. Click Edit.
4. Change the authentication mode.
This setting will apply to all NAS CIFS shares created on the server.
5. Click Update.
IMPORTANT: When switching authentication modes, you must log out and the log back in to the
Windows client before the new authentication settings will work.
IMPORTANT: When the server authentication mode is changed, the adjoining pair service set
authentication mode will be updated based on the new selection. For example, when service set 1
is changed to User Authentication, service set 2 will be updated to the appropriate mode required
for failover (which in this case is the User Authentication mode).

User authentication mode

More information
Creating a local user on the StoreOnce CIFS server on page 47

Creating a local user on the StoreOnce CIFS server

Prerequisites
The authentication mode is currently set to User.
Procedure
1. Navigate to the StoreOnce > NAS Shares > CIFS Server tab.
2. Select Create User.
3. Enter a user name and password.
• The user name can be a maximum length of 64 characters.
• The password:
Selecting the authentication mode 47