Storage Configuration And Reporting; Viewing The File System Report - HPE StoreOnce 6500 User Manual

Storage configuration and reporting

The Storage section in the GUI navigation panel provides information about disk utilization and also
provides configuration tools to perform physical storage expansion.

Viewing the File System Report

In the Navigator, select Storage. The File System Report tab opens by default. This report provides
details about the storage space usage at the file system level as well as the file system status.
This tab shows free space and used space for a couplet, which added together make up the total storage
space. This tab also shows the current node and the couplet to which the Service Set belongs.
NOTE: Couplet Free and Used Space values are redundantly listed for both Service Sets in each couplet.
Table 41: Storage report parameters
Field
Service Set
Current Node
Couplet
File System Total
Capacity (on the
couplet)
File System Free Space
(on the couplet)
File System Used Space The amount of space that has been used. This value increases as data gets
File System Status
Description
The name of the Service Set.
The name of the current node serving this Service Set.
The name of the couplet within the cluster to which this Service Set belongs.
The total available capacity.
The amount of free space. This value will decrease as data gets written to the
appliance and increase when either housekeeping reclaims space or data is
removed from configured stores.
written on the file system and provides a true measurement of the amount of
space used on the file system.
NOTE: Because some amount of meta data and other overhead is not
maintained or calculated by all service sets or subsystems, the used space
will not exactly equal the total capacity minus the free space. However, the
difference is negligible.
The status of the file system. See the "File system status and recommended
actions" table for descriptions and recommended actions.
Storage configuration and reporting 127