Deleting A Library; Editing Library Details - HPE StoreOnce 6500 User Manual

4. Enter the appropriate information; see Library and device details parameters on page 23.
To enable Data at Rest or Data in Flight Encryption for the new library, configure it at this time by
checking the Encryption Enabled box. This feature requires a license. If the license is not installed, an
information message is displayed next to the check box stating Not Licensed. See Security features
and License management for more information.
NOTE: The Replication Wizard does not allow creation of an encrypted target library. If a replication
target library needs encryption enabled, you must create the library on the target appliance before
replication mapping to it.
5. Click Create.
The Cartridges tab is only generated after the library is created. The information on the Interface
Information tab is generated automatically.
NOTE: Once the library has been created, you can enable Secure Erase.

Deleting a library

Prerequisites
Only administrators can delete libraries.
Procedure
1. Navigate to StoreOnce > VTL > Libraries.
2. Select a library from the Libraries list.
3. Click Delete on the Device Details tab.
WARNING: All data on the device will be deleted. The library's deduplication store is also
deleted. It may take some time to delete all the files and free space on the StoreOnce System. If
Secure Erase is enabled for this store, this data will be deleted securely.

Editing library details

Prerequisites
Only administrators can edit library details.
Procedure
1. Navigate to StoreOnce > VTL > Libraries
2. Select a library from the Libraries list.
3. Click Edit on the Device Details tab.
4. Amend details as appropriate.
Deleting a library 29