HPE StoreOnce 6500 User Manual page 114

Field
Queued Time
Started Time
Stopped Time
Estimated
Completion Time
Source Appliance
Source Store
Source Item Name The name of the source item on the StoreOnce System from which the job is
Copy Throughput
Source Item Size
Source Item Last
Modified
Source Item Copy
Offset
Source Item Copy
Size
Destination Item
Copy Offset
Copy Duration
Data Copied
Bandwidth
Utilisation
Bandwidth Saving
114 StoreOnce Catalyst functions
Description
The time the copy job was queued.
The time the copy job was started.
The time the job ended.
The estimated completion time, if the copy job is still running.
The address of the source server. The source is the Service Set on the
StoreOnce System from which the job is being copied to a Service Set on this
StoreOnce System.
The name of the source store on the StoreOnce System from which the job is
being copied.
being copied. All item names are defined by the backup application.
The copy speed.
The size of the source item to be copied; this may be larger than the data size
value (but no smaller).
The date that the source item was last modified. This is useful if you need to
check whether the source item might have been modified during the copy
attempt. An error message is also generated if the source item is modified whilst
copying.
This identifies where the data to be copied occurs within the source item.
This identifies the size of the data to be copied within the source item.
This identifies where the data to be copied will be placed within the destination
item.
The amount of time taken to copy the data.
The amount of data copied, which will match the data size.
The bandwidth utilization in Mb/s. This is the physical bandwidth consumed.
The amount of bandwidth saved. The % bandwidth saving depends upon
whether the store has been configured for source-side deduplication with a low-
bandwidth transfer policy, or target-side deduplication with a high-bandwidth
transfer policy. See Viewing the store details on page 91
Table Continued