Hewlett Packard Enterprise Systems Insight Manager - HPE StoreOnce 6500 User Manual

Hewlett Packard Enterprise Systems Insight
Manager
The MIBs, Management Information Bases, used to represent the information handled by the StoreOnce
System are called SEMI-MIB.mib and TRAP-DESTINATIONS-MIB.mib and are included on the CD
supplied with your product (they can also be downloaded from www.hpe.com/support/hpesc). These
databases must be compiled and registered with Hewlett Packard Enterprise Systems Insight Manager,
so that information from the StoreOnce System can be transmitted to and interpreted by the management
host.
There are three stages to setting up Hewlett Packard Enterprise Systems Insight Manager for use with
the StoreOnce System:
Procedure
1. Register SEMI-MIB.mib and TRAP-DESTINATION-MIB within the base of MIBs supported by Hewlett
Packard Enterprise Systems Insight Manager.
2. Update the existing system type database with the new system type for the StoreOnce System, based
on the unique system object identifier.
3. Discover the StoreOnce System under Hewlett Packard Enterprise Systems Insight Manager
NOTE: For detailed instructions on working with HPE-SIM, refer to the Hewlett Packard Enterprise
Systems Insight Manager Technical Reference Guide.
Register the MIB for the StoreOnce System
• Log on to the Hewlett Packard Enterprise Systems Insight Manager.
• Compile SEMI-MIB.
• Open a Command window and go to Program Files\HP\Systems Insight Manager\mibs.
Enter the command mcompile SEMI-MIB.mib.
• Register SEMI-MIB.
• Still in the Command window, enter the command mxmib —a SEMI-MIB.cfg.
• Compile TRAP-DESTINATIONS-MIB.
• Open a Command window and go to Program Files\HP\Systems Insight Manager\mibs.
Enter the command mcompile TRAP-DESTINATIONS-MIB.mib.
• Register TRAP-DESTINATIONS-MIB.
• Still in the Command window, enter the command mxmib —a TRAP-DESTINATIONS-MIB.cfg.
• Log out from the Hewlett Packard Enterprise System Insight Manager and then log back in again.
• Check that SEMI-MIB and TRAP-DESTINATIONS-MIB have been registered with Hewlett Packard
Enterprise System Insight Manager by selecting Options — Events — SNMP Trap Settings... on the
HPE-SIM Home page.
• Scroll down the list of available MIBs to locate SEMI-MIB and TRAP-DESTINATIONS-MIB.

Hewlett Packard Enterprise Systems Insight Manager

245