HPE StoreOnce 6500 User Manual page 65

Table 18: Replication library parameters
Name
Replication Role
Status
User Data Stored
Size On Disk
Mapped/Total Slots
Device Type
Longest Time Out Of Sync
Library Version
Replication status
Service Set
Slot mappings
Select a local library to display slot mappings for that library.
Users with an administrator login may also remove a slot mapping by clicking the Remove button.
Table 19: Slot mapping parameters
Replication-Source or Replication-Target library selected
Slot Mapping Name
Source/Target Appliance Name
Source/Target Appliance Address
Source/Target Appliance Online
Source/Target Appliance Serial Number
The name of the library, defined when the library device was created.
The role, which may be Non Replicating, Replication-Source, or
Replication-Target. All library devices are initially Non Replicating
until slots have been configured using this page.
The status of the local library (such as online).
The amount of user data stored.
The amount of space used on the disk.
The number of slots that have been mapped out of the total number
of slots configured on the library device.
The emulation type configured for that library.
The longest time out of sync.
The version number of the library.
Replication status, which may be Synchronised, Synchronising, or
Pending Synchronisation.
The Service Set on which the library is configured.
The slot mapping name. It is created when you run the
wizard to define the grouping of slots that you select.
The name of the Target Appliance to which cartridges will
be replicated.
The virtual IP address of the service set.
Indicates whether a replication link is established with the
partner appliance.
The serial number of the Target Appliance to which
cartridges will be replicated.
Table Continued
Replication functions 65