4. Remove the single screw holding the SATA SSD in place and slide the drive out of the plug (see
Figure 48 on page 106
Figure 48: SATA SSDs
Figure 49: Removing the SATA SSD
5. Place the SATA SSD in an electrostatic bag or on an antistatic mat.
6. Place the SSD cover plate back on the chassis and tighten the three captive screws securing the SSD
cover plate.
Installing a SATA Solid State Drive in an ACX7100-32C
Before you install an SATA SSD in the device, ensure that you have taken the necessary precautions to
prevent electrostatic discharge (ESD) damage (see
and
Figure 49 on page
106).
Prevention of Electrostatic Discharge Damage
106
).