Figure 7-7: Das - Configuring Parameters For A Specific Data Parameter - Teledyne t100 Operation Manual

Data Acquisition System (DAS) and APICOM
SETUP X.X 0) PARAM=CONC1, MODE=AVG
PREV NEXT INS DEL EDIT
SETUP X.X PARAMETERS:CONC1
SET> EDIT
SETUP X.X SAMPLE MODE:AVG
<SET SET> EDIT
SETUP X.X PRECISION: 1
<SET SET> EDIT
SETUP X.X STORE NUM. SAMPLES: OFF
<SET EDIT
Figure 7-7: DAS – Configuring Parameters for a Specific Data Parameter
158
To configure the parameters for a specific data parameter, follow the instructions as
shown in Figure 7-6, then press:
EXIT
EXIT
SETUP X.X PARAMETERS: CONC1
PREV NEXT
Cycle through list of available
EXIT
SETUP X.X SAMPLE MODE: AVG
INST AVG SDEV MIN MAX
Press any button for the desired mode
EXIT
SETUP X.X PRECISION: 1
1
Set for 0-4
EXIT
SETUP X.X STORE NUM. SAMPLES: OFF
OFF
Turn ON or OFF
Teledyne API - T100 UV Fluorescence SO
ENTR EXIT
Parameters.
ENTR EXIT
ENTR EXIT
ENTR EXIT
Analyzer
2
ENTR accepts the new
setting and returns to the
previous menu.
EXIT ignores the new setting
and returns to the previous
<SET Returns to
previous
Functions
06807F DCN7335