Figure 9-3: Setup For Manual Calibration Without Z/S Valve Or Izs Option (Step 3) - Teledyne t100 Operation Manual

The SPAN button now
appears during the
transition from zero to span.
You may see both the
SPAN and the ZERO
buttons.

Figure 9-3: Setup for Manual Calibration without Z/S valve or IZS Option (Step 3)

184
SAMPLE RANGE = 500.0 PPB
< TST TST > CAL
SAMPLE RANGE = 500.0 PPB
< TST TST > CAL
ACTION:
Allow zero gas to enter the sample port at the
rear of the instrument.
M-P CAL SO2 STB=X.XXX PPB
< TST TST > CAL
M-P CAL SO2 STB=X.XXX PPB
< TST TST > ZERO CONC
M-P CAL SO2 STB=X.XXX PPB
< TST TST > ENTR CONC
ACTION:
Allow span gas to enter the sample port at the
rear of the instrument.
M-P CAL SO2 STB=X.XXX PPB
< TST TST > SPAN CONC
M-P CAL RANGE = 500.0 PPB
< TST TST > ENTR SPAN CONC
M-P CAL RANGE = 500.0 PPB
< TST TST > ENTR CONC
SO2 =XXX.X
Set the Display to show the
This function calculates the
SETUP
SO2 =XXX.X
SETUP
SO2 =XXX.X
SETUP
SO2 =XXX.X
EXIT
Press ENTR to changes the
SO2 =XXX.X
OFFSET & SLOPE values for the
EXIT
Press EXIT to leave the calibration
unchanged and return to the
SO2 =XXX.X
EXIT
Press ENTR to change the
OFFSET & SLOPE values for the
SO2 =XXX.X
Press EXIT to leave the calibration
EXIT
unchanged and return to the
SO2 =XXX.X
EXIT returns to the main
EXIT
SO2 STB test function.
stability of the SO
2
measurement
Wait until SO2 STB
falls below 0.5 ppb.
This may take several
minutes.
SO measurements.
2
previous menu.
The value of
SO2 STB may jump
significantly.
Wait until it falls back
below 0.5 ppb.
This may take several
minutes.
SO measurements.
2
previous menu.
SAMPLE display
06807F DCN7335