Getting Started
48
Figure 3-13:
Default Pin Assignments for CPU Com Port Connector (RS-232)
RS-232 COM P
D
ORT
As received from the factory, the analyzer is set up to emulate a DCE (Section 6.1) or
modem, with Pin 3 of the DB-9 connector designated for receiving data and Pin 2
designated for sending data.
RS-232: RS-232 (fixed) DB-9 male connector
•
Baud rate: 115200 bits per second (baud)
•
Data Bits: 8 data bits with 1 stop bit
•
Parity: None
COM2: RS-232 (configurable to RS 485), DB-9 female connector.
•
Baud rate: 19200 bits per second (baud).
•
Data Bits: 8 data bits with 1 stop bit.
•
Parity: None.
Configuration: Section 6.3
Teledyne API - T100 UV Fluorescence SO
S
EFAULT
ETTINGS
Analyzer
2
06807F DCN7335