Important Safety Information - Teledyne t100 Operation Manual

IMPORTANT SAFETY INFORMATION

Important safety messages are provided throughout this manual for the purpose of
avoiding personal injury or instrument damage. Please read these messages carefully.
Each safety message is associated with a safety alert symbol and placed throughout this
manual and inside the instrument. The symbols with messages are defined as follows:
Note
ii
WARNING: Electrical Shock Hazard
HAZARD: Strong oxidizer
GENERAL WARNING/CAUTION: Read the accompanying
message for specific information.
CAUTION: Hot Surface Warning
Do Not Touch: Touching some parts of the instrument without
protection or proper tools could result in damage to the part(s)
and/or the instrument.
Technician Symbol: All operations marked with this symbol are
to be performed by qualified maintenance personnel only.
Electrical Ground: This symbol inside the instrument marks the
central safety grounding point for the instrument.
The T100 Analyzer should only be used for the purpose and in the
manner described in this manual. If you use the T100 in a manner other
than that for which it was intended, unpredictable behavior could ensue
with possible hazardous consequences.
NEVER use any gas analyzer to sample combustible gas(es).
Technical Assistance regarding the use and maintenance of the T100 or
any other Teledyne API product can be obtained by contacting Teledyne
API's Technical Support Department:
Email: sda_techsupport@teledyne.com
or by accessing various service options on our website at
Teledyne API - T100 UV Fluorescence SO
CAUTION
GENERAL SAFETY HAZARD
Phone: 800-324-5190
http://www.teledyne-api.com/.
Analyzer
2
06807F DCN7335