Figure 6-9: Comm - Select Hessen Protocol Response Mode; Table 6-6: T100 Hessen Protocol Response Modes - Teledyne t100 Operation Manual

Communications Setup and Operation
6.6.2.4. SETTING THE HESSEN PROTOCOL RESPONSE MODE

Table 6-6: T100 Hessen Protocol Response Modes

MODE ID
CMD This is the Default Setting. Reponses from the instrument are encoded as the traditional command format.
Style and format of responses depend on exact coding of the initiating command.
Responses from the instrument are always delimited with <STX> (at the beginning of the response, <ETX>
BCC
(at the end of the response followed by a 2 digit Block Check Code (checksum), regardless of the command
encoding.
TEXT Responses from the instrument are always delimited with <CR> at the beginning and the end of the string,
regardless of the command encoding.
Press to
change
response
mode.
144
Teledyne API's implementation of Hessen Protocol allows the user to choose one of
several different modes of response for the analyzer.
To Select a Hessen response mode, access the COMMUNICATIONS Menu (refer to
Figure 5-13), then press:
SETUP X.X
ID INET HESN
SETUP X.X HESSEN VARIATION: TYPE 1
SET> EDIT
SETUP X.X HESSEN RESPONSE MODE :CMD
<SET SET> EDIT
SETUP X.X HESSEN RESPONSE MODE :CMD
BCC TEXT CMD
Figure 6-9: COMM – Select Hessen Protocol Response Mode
Teledyne API - T100 UV Fluorescence SO
MODE DESCRIPTION
COMMUNICATIONS MENU
COM1 COM2 EXIT
EXIT
EXIT
ENTR EXIT
2
ENTR accepts the new
settings
EXIT ignores the new
settings
06807F DCN7335
Analyzer