Figure 6-8: Comm - Select Hessen Protocol Type - Teledyne t100 Operation Manual

Teledyne API - T100 UV Fluorescence SO
6.6.2.3. SELECTING A HESSEN PROTOCOL TYPE
Press to change
protocol type.
Note
06807F DCN7335
Analyzer
2
Currently there are two version of Hessen Protocol in use. The original implementation,
referred to as TYPE 1, and a more recently released version, TYPE 2 that has more
flexibility when operating with instruments that can measure more than one type of gas.
For more specific information about the difference between TYPE 1 and TYPE 2
download the Manual Addendum for Hessen Protocol from Teledyne API's web site:
http://www.teledyne-api.com/manuals/index.asp.
To select a Hessen Protocol Type, access the COMMUNICATIONS Menu (refer to
Figure 5-13), then press:
SETUP X.X COMMUNICATIONS MENU
ID INET HESN
SETUP X. HESSEN VARIATION: TYPE 1
SET> EDIT
SETUP X.X HESSEN VARIATION: TYPE 1
TYPE1 TYPE 2
SETUP X.X HESSEN VARIATION: TYPE 2
PREV NEXT OFF
Figure 6-8: COMM – Select Hessen Protocol Type
While Hessen Protocol Mode can be activated independently for RS-232
and COM2, the TYPE selection affects both Ports.
Communications Setup and Operation
COM1 COM2 EXIT
EXIT
ENTR EXIT
ENTR EXIT
ENTR accepts the new
settings
EXIT ignores the new
settings
143