Com Port Password Security; Additional Communications Documentation; Table 8-5: Serial Interface Documents - Teledyne t100 Operation Manual

Remote Operation of the Analyzer
8.4.

COM PORT PASSWORD SECURITY

8.5.

ADDITIONAL COMMUNICATIONS DOCUMENTATION

Table 8-5: Serial Interface Documents

Interface / Tool
APICOM
DAS Manual
* These documents can be downloaded at http://www.teledyne-api.com/manuals/.
178
In order to provide security for remote access of the T100, a LOGON feature can be
enabled to require a password before the instrument will accept commands. This is done
by turning on the SECURITY MODE (refer to Section 5.5). Once the SECURITY
MODE is enabled, the following items apply.
•
A password is required before the port will respond or pass on commands.
•
If the port is inactive for one hour, it will automatically logoff, which can also be
achieved with the LOGOFF command.
•
Three unsuccessful attempts to log on with an incorrect password will cause
subsequent logins to be disabled for 1 hour, even if the correct password is used.
•
If not logged on, the only active command is the '?' request for the help screen.
•
The following messages will be returned at logon:
•
LOGON SUCCESSFUL - Correct password given
•
LOGON FAILED - Password not given or incorrect
•
LOGOFF SUCCESSFUL - Connection terminated successfully
To log on to the T100 analyzer with SECURITY MODE feature enabled, type:
LOGON 940331
940331 is the default password. To change the default password, use the variable RS-
232_PASS issued as follows:
V RS-232_PASS=NNNNNN
Where N is any numeral between 0 and 9.
Document Title
APICOM User Manual
Detailed description of the DAS
Teledyne API - T100 UV Fluorescence SO
Part Number
058130000
028370000
Analyzer
2
Available Online*
YES
YES
06807F DCN7335