Teledyne API - T100 UV Fluorescence SO
4.1.
SAMPLE MODE
4.1.1.
TEST FUNCTIONS
06807F DCN7335
Analyzer
2
This is the analyzer's standard operating mode. In this mode, the instrument is analyzing
SO
and calculating concentrations.
2
A series of test functions is available at the front panel while the analyzer is in
SAMPLE mode. These parameters provide information about the present operating
status of the instrument and are useful during troubleshooting (refer to Section 11.1.2).
They can also be recorded in one of the DAS channels (refer to Section 7) for data
analysis. To view the test functions, press one of the <TST TST> buttons repeatedly in
either direction.
Overview of Operating Modes
77