Technical Assistance - Teledyne t100 Operation Manual

Teledyne API - T100 UV Fluorescence SO
QUESTION
How do I program and use them?
How long does the sample pump last?
Do I need a strip chart recorder or
external data logger?
11.9.

TECHNICAL ASSISTANCE

06807F DCN7335
Analyzer
2
The sample pump should last about one year and the pump diaphragms should to
be replaced annually or when necessary. Use the PRES test function displayed via
the front panel to see if the diaphragm needs replacement (refer to Section 11.1.2).
No, the T100 is equipped with a very powerful internal data acquisition system.
Section 7 describes the setup and operation in detail.
If this manual and its troubleshooting / repair sections do not solve your problems,
technical assistance may be obtained from:
Teledyne API, Technical Support
9970 Carroll Canyon Road
San Diego, California 92131-1106 USA
Toll-free Phone: 800-324-5190
Website:
Before contacting Teledyne API Technical Support, please fill out the problem report
form in Appendix C, which is also available online for electronic submission at
http://www.teledyne-api.com/forms/.
ANSWER
Phone: +1 858-657-9800
Fax: +1 858-657-9816
Email:
sda_techsupport@teledyne.com
http://www.teledyne-api.com/
Troubleshooting & Service
261