Disabling/Enabling Data Channels; Figure 7-11: Das - Disabling / Enabling Data Channels - Teledyne t100 Operation Manual

Teledyne API - T100 UV Fluorescence SO
7.2.10.

DISABLING/ENABLING DATA CHANNELS

Toggle to turn
channel ON or OFF
06807F DCN7335
Analyzer
2
Data channels can be temporarily disabled, which can reduce the read/write wear on the
disk-on-module. The ALL_01 channel of the T100, for example, is disabled by default.
To disable a data channel, follow the instruction shown in Figure 7-3, then press:
Edit Data Channel Menu
SETUP X.X 0) CONC:
PREV NEXT INS
SETUP X.X NAME:CONC
<SET SET> EDIT
Press SET> until...
SETUP X.X CHANNEL ENABLE:ON
<SET SET> EDIT
SETUP X.X CHANNEL ENABLE:ON
OFF
Figure 7-11: DAS – Disabling / Enabling Data Channels
Data Acquisition System (DAS) and APICOM
ATIMER, 2, 4032, R
DEL EDIT PRNT EXIT
PRINT EXIT
PRINT EXIT
ENTR EXIT
Exits to the main
Data Acquisition
menu
ENTR accepts the new
setting and returns to the
previous menu.
EXIT ignores the new setting
and returns to the previous
menu.
163