Report Function; Compact Report; Starting Date; Figure 7-10: Das - Rs-232 Report Function - Teledyne t100 Operation Manual

Data Acquisition System (DAS) and APICOM
7.2.7. RS-232 REPORT FUNCTION
Toggle to turn
reporting ON or OFF
7.2.8.

COMPACT REPORT

7.2.9.

STARTING DATE

162
The DAS can automatically report data to the communications ports, where they can be
captured with a terminal emulation program or simply viewed by the user.
To enable automatic COMM port reporting, follow the instruction shown in Figure 7-3,
then press:
Edit Data Channel Menu
SETUP X.X 0) CONC:
PREV NEXT
SETUP X.X NAME:CONC
<SET SET> EDIT
Press SET> until...
SETUP X.X RS-232 REPORT: OFF
<SET SET> EDIT
SETUP X.X RS-232 REPORT: OFF
OFF
Figure 7-10: DAS – RS-232 Report Function
When enabled, this option avoids unnecessary line breaks on all RS-232 reports. Instead
of reporting each parameter in one channel on a separate line, up to five parameters are
reported in one line, instead.
This option allows a user to specify a starting date for any given channel in case the user
wants to start data acquisition only after a certain time and date. If the Starting Date is
in the past, the DAS ignores this setting.
Teledyne API - T100 UV Fluorescence SO
ATIMER, 2, 4032, R
INS DEL EDIT PRNT EXIT
PRINT EXIT
PRINT EXIT
ENTR EXIT
Analyzer
2
Exits to the main
Data Acquisition
menu
ENTR accepts the new
setting and returns to the
previous menu.
EXIT ignores the new setting
and returns to the previous
menu.
06807F DCN7335