Editing Modulation - Native Instruments MASCHINE MK3 Getting Started

Your modulation gets recorded now. On the next loop, the parameter changes will be re-
→
produced.
There is also another way to record modulation from your controller: the step sequencer.
More on this in ↑8, Creating Beats with the Step
Delete the Recorded Modulation
If you want to discard the modulation you just recorded and try again, do the following:
Press and hold ERASE, and touch the same Knob 1–8 to delete the modulation for the
►
corresponding parameter.
7.3.2

Editing Modulation

You edit any recorded modulation in the software. For this, the Control Lane is at your disposal
at the bottom of the Pattern Editor:
The Control Lane displays the changes you recorded for each automated parameter.
To edit the modulation:
1. Click the desired parameter in the list of automated parameters (on the left) to select it.
2. Drag the modulation points vertically in the Control Lane.
For more information on editing modulation and automation, please refer to the Manual.
Sequencer!
MASCHINE - Getting Started - 119
Applying Effects
Modulating Effect Parameters