Page 4: Modulation Envelope And Destination - Native Instruments MASCHINE MIKRO MK2 Manual

Parameter
SR
Bits
Filter Modes
The Mode selector in the
arrows or clicking the type currently displayed, you can choose from different filter type set-
tings: Off, HP2, BP2, LP2, and EQ. Each type results in different parameters to the right of it:
Filter Modes
Off
LP2
BP2
HP2
EQ
4.2.4

Page 4: Modulation Envelope and Destination

Sampler parameters – page 4 of 6: MODULATION ENVELOPE and DESTINATION on the controller.
Description
SR stands for sample rate: you can use it to lower the original sample rate in or-
der to make the Sound more lo-fi.
Allows you to lower the original bit depth of the Sound, resulting in a more
rough, digital sounding lo-fi effect.
Filter section gives you access to a set of different filters. Using the
Description
No filter.
LP2 is a low-pass filter with
Velocity, the Modulation Envelope, the LFO or the MIDI Modulation Wheel.
BP2 is a band-pass filter with Cutoff.
Modulation Envelope, the LFO or the MIDI Modulation Wheel.
HP2 is a high-pass filter with
Velocity, the Modulation Envelope, the LFO or the MIDI Modulation Wheel.
The EQ is an equalizer with Frequency,
Cutoff and Resonance. Cutoff
Cutoff can be modulated by Velocity, the
Cutoff and Resonance. Cutoff
Bandwidth and Gain.
MASCHINE MIKRO MK2 - Manual - 97
Working with Sounds
The Sampler Module
can be modulated by
can be modulated by