Welcome to MASCHINE JAM
Connecting MASCHINE JAM
Connecting MASCHINE JAM to a computer.
MASCHINE JAM will not work when it is connected to a USB 1.1 port. A USB 2.0 (or later)
port is required!
Windows users: In case you have installed the software including the hardware drivers, but the
controller is not detected by your computer, connect the USB cable to another USB port before
taking further measures.
1.4.2
Using MASCHINE JAM as a MIDI Device
In addition to using your MASCHINE controller together with its dedicated MASCHINE soft-
ware, you can also use it as a powerful and highly versatile MIDI controller to pilot any other
MIDI-capable software application running on the computer it is connected to via USB. This is
made possible by the Controller Editor software, an application that allows you to precisely de-
fine all MIDI assignments for your MASCHINE controller. The Controller Editor is installed dur-
MASCHINE JAM - Manual - 13