Monitor Process - HPE FlexNetwork 7500 Series Command Reference Manual

undo monitor kernel starvation time [ chassis chassis-number slot slot-number [ cpu
cpu-number ] ]
Default
The interval for identifying a kernel thread starvation is 120 seconds.
Views
System view
Predefined user roles
network-admin
Parameters
time time: Specifies the interval for identifying a kernel thread starvation, in the range of 1 to 65535
seconds.
slot slot-number: Specifies a card by its slot number. If you do not specify this option, the active MPU
is specified. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. If you do not
specify this option, the global active MPU is specified. (In IRF mode.)
cpu cpu-number: Specifies a CPU by its number.
Usage guidelines
Inappropriate use of the command can cause service problems or system breakdown. Make sure
you understand the impact of the command on your network before you use it.
If a thread is not executed within the specified interval, the system considers that a starvation has
occurred, and outputs a starvation message.
Examples
# Set the interval for identifying a kernel thread starvation to 120 seconds.
<Sysname> system-view
[Sysname] monitor kernel starvation time 120
Related commands
display kernel starvation
display kernel starvation configuration
monitor kernel starvation enable

monitor process

Use monitor process to display process statistics.
Syntax
In standalone mode:
monitor process [ dumbtty ] [ iteration number ] [ slot slot-number [ cpu cpu-number ] ]
In IRF mode:
monitor process [ dumbtty ] [ iteration number ] [ chassis chassis-number slot slot-number [ cpu
cpu-number ] ]
Views
Any view
302