Cwmp Cpe Provision-Code - HPE FlexNetwork 7500 Series Command Reference Manual

If a password is configured, the ACS must provide the correct password when it initiates a
connection to the CPE. If the password is incorrect, the CPE denies the connection request from the
ACS.
You do not need to configure this command if you want to authenticate the ACS only based on its
username.
Examples
# Configure the password used for authenticating the ACS.
<Sysname> system-view
[Sysname] cwmp
[Sysname-cwmp] cwmp cpe password simple newpsw
Related commands
cwmp cpe username

cwmp cpe provision-code

Use cwmp cpe provision-code to configure the provision code of the CPE.
Use undo cwmp cpe provision-code to restore the default.
Syntax
cwmp cpe provision-code provision-code
undo cwmp cpe provision-code
Default
The provision code is PROVISIONINGCODE.
Views
CWMP view
Predefined user roles
network-admin
mdc-admin
Parameters
provision-code: Specifies a provision code, a string of 1 to 64 characters. The string can contain
uppercase letters, digits, and the full stop (.).
Usage guidelines
The ACS can use the provision code to identify services assigned to each CPE. For correct
configuration deployment, make sure the same provision code is configured on the CPE and the
ACS. For information about the support of your ACS for provision codes, see the ACS
documentation.
The CPE can have only one provision code. If you execute this command multiple times, the most
recent configuration takes effect.
Examples
# Set the provision code to ABC20150714.
<Sysname> system
[Sysname] cwmp
[Sysname-cwmp] cwmp cpe provision-code ABC20150714
447