Ip Netstream Timeout Inactive - HPE FlexNetwork 7500 Series Command Reference Manual
Network management and monitoring
Hide thumbs
Also See for FlexNetwork 7500 Series:
- Security configuration manual (597 pages) ,
- Network management and monitoring command reference (430 pages) ,
- Command reference manual (376 pages)
Table of Contents
Advertisement
Syntax
ip netstream timeout active minutes
undo ip netstream timeout active
Default
The aging timer is 5 minutes for active flows.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
minutes: Sets the aging timer for active flows, in the range of 1 to 5 minutes.
Usage guidelines
A flow is considered active if packets for the NetStream entry arrive before the timer set by this
command expires.
Examples
# Set the aging timer to 3 minutes for active flows.
<Sysname> system-view
[Sysname] ip netstream timeout active 3
Related commands
ip netstream timeout inactive
ip netstream timeout inactive
Use ip netstream timeout inactive to set the aging timer for inactive flows.
Use undo ip netstream timeout inactive to restore the default.
Syntax
ip netstream timeout inactive seconds
undo ip netstream timeout inactive
Default
The aging timer is 300 seconds for inactive flows.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
seconds: Sets the aging timer for inactive flows, in the range of 10 to 320 seconds.
350
Advertisement
Table of Contents
