Binding An Is-Is Process With Mibs; Configuring Bfd For Is-Is; Displaying And Maintaining Is-Is - HPE 5800 Series Configuration Manual

Step
Enter system view.
1.
Enter IS-IS view.
2.
Enable SNMP trap.
3.

Binding an IS-IS process with MIBs

This task allows you to bind MIB with an IS-IS process to send and collect information. For more
information about MIB, see Network Management and Monitoring Configuration Guide.
To bind an IS-IS process with MIBs:
Step
Enter system view.
1.
Enter IS-IS view.
2.
Bind the IS-IS process with
3.
MIBs.

Configuring BFD for IS-IS

Step
Enter system view.
1.
Enter interface view.
2.
Enable IS-IS on the
3.
interface.
Enable BFD on the IS-IS
4.
interface.

Displaying and maintaining IS-IS

Task
Display brief IS-IS configuration
information.
Display the status of IS-IS debug
switches.
Command
system-view
isis [ process-id ] [ vpn-instance
vpn-instance-name ]
is-snmp-traps enable
Command
system-view
isis [ process-id ] [ vpn-instance
vpn-instance-name ]
isis mib-binding process-id
Command
system-view
interface interface-type
interface-number
isis enable [ process-id ]
isis bfd enable
Command
display isis brief [ process-id | vpn-instance
vpn-instance-name ] [ | { begin | exclude |
include } regular-expression ]
display isis debug-switches { process-id |
vpn-instance vpn-instance-name } [ | { begin |
exclude | include } regular-expression ]
143
Remarks
N/A
N/A
Enabled by default.
Remarks
N/A
N/A
By default, MIBs are bound with
IS-IS process 1.
Remarks
N/A
N/A
Disabled by default.
Not enabled by default.
Remarks
Available in any
view.
Available in any
view.