Enable Log Updown - HPE FlexNetwork 7500 Series Command Reference Manual
Network management and monitoring
Hide thumbs
Also See for FlexNetwork 7500 Series:
- Security configuration manual (597 pages) ,
- Network management and monitoring command reference (430 pages) ,
- Command reference manual (376 pages)
Table of Contents
Advertisement
Examples
# Display the summary of the security log file.
<Sysname> display security-logfile summary
Security log file: Enabled
Security log file size quota: 10 MB
Security log file directory: flash:/seclog
Alarm threshold: 80%
Current usage: 30%
Writing frequency: 24 hour 0 min 0 sec
Table 90 Command output
Field
Security log file
Security log file size quota
Security log file directory
Alarm-threshold
Current usage
Writing frequency
Related commands
authorization-attribute (Security Command Reference)
enable log updown
Use enable log updown to enable an interface to generate link up or link down logs when the
interface state changes.
Use undo enable log updown to disable an interface from generating link up or link down logs
when the interface state changes.
Syntax
enable log updown
undo enable log updown
Default
All interfaces are allowed to generate link up and link down logs.
Views
Interface view
Predefined user roles
network-admin
mdc-admin
Examples
# Disable Ten-GigabitEthernet 1/0/1 from generating link up or link down logs.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
Description
Status of the security log file:
•
Enabled—Security logs can be output to the security log file.
•
Disabled—Security logs cannot be output to the security log file.
Maximum storage space reserved for the security log file.
Security log file directory.
Alarm threshold of the security log file usage.
Current usage of the security log file.
Security log file writing frequency.
384
Advertisement
Table of Contents
