HPE FlexNetwork 7500 Series Command Reference Manual page 249

User role
network-operator
mdc-operator
To ensure the format correctness of NETCONF messages in XML view, do not enter NETCONF
messages manually. Copy and paste the messages.
While the device is performing a NETCONF operation, do not perform any other operations, such as
pasting a NETCONF message or pressing Enter.
For the device to identify NETCONF messages, you must add end mark ]]>]]> at the end of each
NETCONF message.
After you enter XML view, the device automatically advertises its NETCONF capabilities to the client.
In response, you must configure the client to notify the device of its supported NETCONF capabilities.
After the capability exchange, you can use the client to configure the device.
NETCONF messages must comply with the XML format requirements and semantic and syntactic
requirements in the NETCONF XML API reference for the device. As a best practice, use third-party
software to generate NETCONF messages to ensure successful configuration.
To quit XML view, use a NETCONF message instead of the quit command.
If you have configured a shortcut key (Ctrl + C, by default) by using the escape-key command in
user line/user line class view, the NETCONF message should not contain the shortcut key string. If
the NETCONF message contains the shortcut key string, relevant configurations in XML view might
be affected. For example, in user line view, you configured "a" as the shortcut key by using the
escape-key a command. When a NETCONF message includes the character "a," only the contents
after the last "a" in the message can be processed.
Examples
# Enter XML view.
<Sysname> xml
<?xml version="1.0" encoding="UTF-8"?><hello
xmlns="urn:ietf:params:xml:ns:netconf:base:1.0"><capabilities><capability>urn:ietf:pa
rams:netconf:base:1.1</capability><capability>urn:ietf:params:netconf:writable-runnin
g</capability><capability>urn:ietf:params:netconf:capability:notification:1.0</capabi
lity><capability>urn:ietf:params:netconf:capability:validate:1.1</capability><capabil
ity>urn:ietf:params:netconf:capability:interleave:1.0</capability><capability>urn:hp:
params:netconf:capability:hp-netconf-ext:1.0</capability></capabilities><session-id>1
</session-id></hello>]]>]]>
# Notify the device of the NETCONF capabilities supported on the client.
<hello xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<capabilities>
<capability>
</capability>
</capabilities>
</hello>]]>]]>
# Quit XML view.
<rpc message-id="101" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<close-session>
NETCONF operations
•
•
•
•
•
•
urn:ietf:params:netconf:base:1.0
Get
Get-bulk
Get-bulk-config
Get-config
Get-sessions
Close-session
239