Display Process Memory Heap Address - HPE FlexNetwork 7500 Series Command Reference Manual

81920
Summary:
Total virtual memory heap space (in bytes)
Total physical memory heap space (in bytes) :
Total allocated memory (in bytes)
Table 71 Command output
Field
Size
Free
Used
Total
Free Ratio
Related commands
display process memory

display process memory heap address

display process memory heap size
display process memory heap address
Use display process memory heap address to display heap memory content starting from a
specified memory block for a process.
Syntax
In standalone mode:
display process memory heap job job-id address starting-address length memory-length [ slot
slot-number [ cpu cpu-number ] ]
In IRF mode:
display process memory heap job job-id address starting-address length memory-length
[ chassis chassis-number slot slot-number [ cpu cpu-number ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
job job-id: Specifies a user process by its job ID, in the range of 1 to 2147483647.
address starting-address: Specifies the starting memory block by its address.
length memory-length: Specifies the memory block length in the range of 1 to 1024 bytes.
slot slot-number: Specifies a card by its slot number. If you do not specify this option, the command
displays memory content information on the active MPU.(In standalone mode.)
0 1
Description
Size of each memory block, in bytes.
Number of free memory blocks.
Number of used memory blocks.
Total number of memory blocks.
Ratio of free memory to total memory. It helps identify fragment information.
1 0%
: 2293760
58368
: 42368
292