Display Snmp-Agent Context; Display Snmp-Agent Group - HPE FlexNetwork 7500 Series Command Reference Manual
Network management and monitoring
Hide thumbs
Also See for FlexNetwork 7500 Series:
- Security configuration manual (597 pages) ,
- Network management and monitoring command reference (430 pages) ,
- Command reference manual (376 pages)
Table of Contents
Advertisement
display snmp-agent context
Use display snmp-agent context to display SNMP contexts.
Syntax
display snmp-agent context [ context-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
context-name: Specifies an SNMP context by its name, a case-sensitive string of 1 to 32 characters.
If you do not specify this argument, the command displays all SNMP contexts.
Examples
# Display all SNMP contexts.
<Sysname> display snmp-agent context
testcontext
Related commands
snmp-agent context
display snmp-agent group
Use display snmp-agent group to display information about SNMP groups.
Syntax
display snmp-agent group [ group-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
group-name: Specifies an SNMPv1, SNMPv2c, or SNMPv3 group name in non-FIPS mode, and an
SNMPv3 group name in FIPS mode. It is a case-sensitive string of 1 to 32 characters. If you do not
specify a group, this command displays information about all SNMP groups.
Examples
# Display information about all SNMP groups.
<Sysname> display snmp-agent group
169
Advertisement
Table of Contents
