Logfile Save; Reset Logbuffer - HPE FlexNetwork 7500 Series Command Reference Manual
Network management and monitoring
Hide thumbs
Also See for FlexNetwork 7500 Series:
- Security configuration manual (597 pages) ,
- Network management and monitoring command reference (430 pages) ,
- Command reference manual (376 pages)
Table of Contents
Advertisement
<Sysname> system-view
[Sysname] info-center trace-logfile quota 6
logfile save
Use logfile save to manually save logs in the log file buffer to the log file.
Syntax
logfile save
Views
Any view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
You can specify the directory to save the log file by using the info-center logfile directory
command.
The system clears the log file buffer after saving the buffered logs to the log file automatically or
manually.
If the log file buffer is empty, this command displays a success message event though no logs are
saved to the log file.
Examples
# Manually save logs from the log file buffer to a log file.
<Sysname> logfile save
The contents in the log file buffer have been saved to the file flash:/logfile/logfile.log.
Related commands
info-center logfile enable
info-center logfile directory
reset logbuffer
Use reset logbuffer to clear the log buffer.
Syntax
reset logbuffer
Views
User view
Predefined user roles
network-admin
mdc-admin
Examples
# Clear the log buffer.
<Sysname> reset logbuffer
405
Advertisement
Table of Contents
