HPE FlexNetwork 7500 Series Command Reference Manual page 273

mdc-admin
Parameters
role-name: Specifies a user role by its name, a case-sensitive string of 1 to 63 characters.
Usage guidelines
For EAA to execute an action in a monitor policy, you must assign the policy the user role that has
access to the action-specific commands and resources. If EAA lacks access to an action-specific
command or resource, EAA does not perform the action and all the subsequent actions.
For example, a monitor policy has four actions numbered from 1 to 4. The policy has user roles that
are required for performing actions 1, 3, and 4, but it does not have the user role required for
performing action 2. When the policy is triggered, EAA executes only action 1.
A monitor policy supports a maximum of 64 valid user roles. User roles added after this limit is
reached do not take effect.
An EAA policy cannot have both the security-audit user role and any other user roles. Any
previously assigned user roles are automatically removed when you assign the security-audit user
role to the policy. The previously assigned security-audit user role is automatically removed when
you assign any other user roles to the policy.
Examples
# Assign user roles to a CLI-defined policy.
<Sysname> system-view
[Sysname] rtm cli-policy test
[Sysname-rtm-test] user-role network-admin
[Sysname-rtm-test] user-role admin
263