Examples
# Set the interval for identifying a kernel thread starvation to 120 seconds.
<Sysname> system-view
[Sysname] monitor kernel starvation time 120
Related commands
•
display kernel starvation
•
display kernel starvation configuration
•
monitor kernel starvation enable
•
monitor kernel starvation exclude-thread
monitor process
Use monitor process to display process statistics.
Syntax
monitor process [ dumbtty ] [ iteration number ] [ slot slot-number [ cpu cpu-number ] ]
Views
Any view
Predefined user roles
network-admin
Parameters
dumbtty: Specifies dumbtty mode. In this mode, the command displays process statistics in
descending order of CPU usage without refreshing statistics. If you do not specify this keyword, the
command displays statistics for the top 10 processes in descending order of CPU usage in an
interactive mode, and refreshes statistics every 5 seconds by default.
iteration number: Specifies the number of display times, in the range of 1 to 4294967295. If you
specify the dumbtty keyword, the number argument is 1 by default. If neither the dumbtty keyword
nor the number argument is specified, there is no limit to the display times and process statistics are
refreshed every 5 seconds.
slot slot-number: Specifies an IRF member device by its ID. If you do not specify this option, the
command displays process statistics for the master device.
cpu cpu-number: Specifies a CPU by its number.
Usage guidelines
If you do not specify the dumbtty keyword, the command displays process statistics in an interactive
mode. In this mode, the system automatically determines the number of displayed processes
according to the screen size, and does not display exceeding processes. You can also input
interactive commands as shown in
Table 71 Interactive commands
Commands
? or h
1
Table 71
Description
Displays help information that includes available interactive commands.
Displays state information for physical CPUs. For example, if you enter 1 for the first time,
the state of each physical CPU is displayed in a separate row. If you enter 1 again, the
average value of all CPU states is displayed. If you enter 1 for the third time, separate
states are displayed.
By default, the average value of all CPU states is displayed.
to perform relevant operations.
295