Monitor Process - HPE FlexNetwork 5130 HI Series Network Management And Monitoring Command Reference

Views
System view
Predefined user roles
network-admin
Parameters
time time: Specifies the interval for identifying a kernel thread starvation, in the range of 1 to 65535
seconds.
slot slot-number: Specifies an IRF member device by its ID. If you do not specify this option, the
master device is specified.
cpu cpu-number: Specifies a CPU by its number.
Usage guidelines
Inappropriate use of the command can cause service problems or system breakdown. Make sure
you understand the impact of the command on your network before you use it.
If a thread is not executed within the specified interval, the system considers that a starvation has
occurred, and outputs a starvation message.
Examples
# Set the interval for identifying a kernel thread starvation to 120 seconds.
<Sysname> system-view
[Sysname] monitor kernel starvation time 120
Related commands
display kernel starvation
display kernel starvation configuration
monitor kernel starvation enable

monitor process

Use monitor process to display process statistics.
Syntax
monitor process [ dumbtty ] [ iteration number ] [ slot slot-number [ cpu cpu-number ] ]
Views
Any view
Predefined user roles
network-admin
Parameters
dumbtty: Specifies dumbtty mode. In this mode, the command displays process statistics in
descending order of CPU usage without refreshing statistics. If you do not specify this keyword, the
command displays statistics for the top 10 processes in descending order of CPU usage in an
interactive mode, and refreshes statistics every 5 seconds by default.
iteration number: Specifies the number of display times, in the range of 1 to 4294967295. If you
specify the dumbtty keyword, the number argument is 1 by default. If neither the dumbtty keyword
nor the number argument is specified, there is no limit to the display times and process statistics are
refreshed every 5 seconds.
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command displays information for the master device.
295