Outputting Logs To The Console; Outputting Logs To The Monitor Terminal - HPE FlexNetwork 5510 HI Series Network Management And Monitoring Configuration Manual

Task at a glance
(Optional.) Configuring the maximum size of the trace log file
(Optional.) Enabling synchronous information output
(Optional.) Enabling duplicate log suppression
(Optional.) Disabling an interface from generating link up or link down logs
(Optional.) Setting the minimum storage period for logs

Outputting logs to the console

Step
1. Enter system view.
2. Enable
center.
3. Configure an output rule for
the console.
4. (Optional.)
timestamp format.
5. Return to user view.
6. (Optional.) Enable log output
to the console.
7. Enable the display of debug
information on the current
terminal.
8. (Optional.) Set the lowest
severity level of logs that can
be output to the console.

Outputting logs to the monitor terminal

Monitor terminals refer to terminals that log in to the device through the VTY line.
To output logs to the monitor terminal:
Step
1. Enter system view.
2. Enable
center.
3. Configure an output rule for
the monitor terminal.
4. (Optional.)
timestamp format.
Command
system-view
the information
info-center enable
info-center
{ module-name
{ console | monitor | logbuffer |
logfile | loghost } { deny | level
severity }
Configure the
info-center timestamp { boot |
date | none }
quit
terminal monitor
terminal debugging
terminal logging level severity
Command
system-view
the information
info-center enable
info-center
{ module-name
{ console | monitor | logbuffer |
logfile | loghost } { deny | level
severity }
Configure the
info-center timestamp { boot |
date | none }
source
| default }
source
| default }
55
Remarks
N/A
By default, the information center
is enabled.
For information about default
output rules, see "Default output
rules for logs."
By default, the timestamp format
is date.
N/A
The default setting is enabled.
By default, the display of debug
information is disabled on the
current terminal.
The default setting
(informational).
Remarks
N/A
By default, the information center
is enabled.
For information about default
output rules, see "Default output
rules for logs."
By default, the timestamp format
is date.
is 6