Snmp-Agent Trap Life; Snmp-Agent Trap Log - HPE FlexNetwork 7500 Series Command Reference Manual
Network management and monitoring
Hide thumbs
Also See for FlexNetwork 7500 Series:
- Security configuration manual (597 pages) ,
- Network management and monitoring command reference (430 pages) ,
- Command reference manual (376 pages)
Table of Contents
Advertisement
When you use this command, make sure the NMS supports the extended linkup and linkDown
notifications.
Examples
# Enable extended linkUp/linkDown notifications.
<Sysname> system-view
[Sysname] snmp-agent trap if-mib link extended
snmp-agent trap life
Use snmp-agent trap life to set the lifetime of notifications in the SNMP notification queue.
Use undo snmp-agent trap life to restore the default notification lifetime.
Syntax
snmp-agent trap life seconds
undo snmp-agent trap life
Default
The SNMP notification lifetime is 120 seconds.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
seconds: Sets a lifetime in the range of 1 to 2592000, in seconds.
Usage guidelines
When congestion occurs, the SNMP agent buffers notifications in a queue. The notification lifetime
sets how long a notification can stay in the queue. A notification is deleted when its lifetime expires.
Examples
# Set the SNMP notification lifetime to 60 seconds.
<Sysname> system-view
[Sysname] snmp-agent trap life 60
Related commands
snmp-agent target-host
snmp-agent trap enable
snmp-agent trap queue-size
snmp-agent trap log
Use snmp-agent trap log to enable SNMP notification logging.
Use undo snmp-agent trap log to disable SNMP notification logging.
Syntax
snmp-agent trap log
undo snmp-agent trap log
204
Advertisement
Table of Contents
