HPE FlexNetwork 7500 Series Command Reference Manual page 427

In IRF mode:
display diagnostic result [ chassis chassis-number [ slot slot-number [ test test-name ] ] ]
[ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number: Specifies a card by its slot number. If you do not specify this option, the command
applies to all cards. (In standalone mode.)
chassis chassis-number: Specifies an IRF member device by its member ID. If you do not specify a
member device, the command applies to all member devices. (In IRF mode.)
slot slot-number: Specifies a card by its slot number. If you do not specify a card, the command
applies to all cards. (In IRF mode.)
test test-name: Specifies a test by its name, a case-sensitive character string. You can use the test ?
command to verify the value range of the test name. If you do not specify this option, the command
applies to all diagnostic tests.
verbose: Displays detailed test results for diagnostic tests that are enabled or executed. (Statistics
are not included.) If you do not specify this parameter, the command displays brief test results for the
diagnostic tests.
Examples
# (In standalone mode.) Display brief test results for all diagnostic tests on the specified slot.
<Sysname> display diagnostic result slot 1
Slot 1:
Name
IPCMonitor
BoardStatusMonitor
TaskMonitor
PortMonitor
ComponentMonitor
# (In standalone mode.) Display detailed test results for all diagnostic tests.
<Sysname> display diagnostic result verbose
Slot 1:
Test name
Total run count
Total failure count
Consecutive failure count: 0
Last execution time
First failure time
Last failure time
Last pass time
Last execution result
Last failure reason
Next execution time
ipc link status : Normal
Run count
51
386
310
310
103
: IPCMonitor
: 52
: 0
: Fri Nov 21 23:13:25 2014
: -NA-
: -NA-
: Fri Nov 21 23:13:25 2014
: Success
: -NA-
: Fri Nov 21 23:14:25 2014
417
Failure count Last result
0 Success
0 Success
0 Success
0 Success
0 Success