HPE FlexNetwork 7500 Series Command Reference Manual page 227

Parameters
entry-number: Specifies an event entry by its index in the range of 1 to 65535. If you do not specify
an entry, the command displays log entries for all event entries.
Usage guidelines
If the log action is specified for an event, the system adds a record in the event log table each time
the event occurs. Each record contains the log entry index, time when the event was logged (the
amount of time that elapsed since system startup), and event description.
The system can maintain a maximum of 10 records for an event. The most recent record replaces
the oldest record if the number of records reaches 10.
Examples
# Display the RMON log for event entry 99.
<Sysname> display rmon eventlog 99
EventEntry 99 owned by ww is VALID.
LogEntry 99.1 created at 50days 08h:54m:44s uptime.
Description: The 1.3.6.1.2.1.16.1.1.1.4.5 defined in alarmEntry 77,
uprise 16760000 with alarm value 16776314. Alarm sample type is absolute.
LogEntry 99.2 created at 50days 09h:11m:13s uptime.
Description: The 1.3.6.1.2.1.16.1.1.1.4.5 defined in alarmEntry 77,
less than(or =) 20000000 with alarm value 16951648. Alarm sample type is absolute.
LogEntry 99.3 created at 50days 09h:18m:43s uptime.
Description: The alarm formula defined in prialarmEntry 777,
less than(or =) 15000000 with alarm value 14026493. Alarm sample type is absolute.
LogEntry 99.4 created at 50days 09h:23m:28s uptime.
Description: The alarm formula defined in prialarmEntry 777,
uprise 17000000 with alarm value 17077846. Alarm sample type is absolute.
This example shows that the event log table has four records for event 99:
•
Two records were created when event 99 was triggered by alarm entry 77.
•
Two records were created when event 99 was triggered by private alarm entry 777.
Table 48 Command output
Field
EventEntry
entry-number
owned by owner
is status.
LogEntry
entry-number
created at
created-time
uptime.
Description
Description
Event log entry owner and status:
•
entry-number—Event log entry index, which is the same as the event entry index
for which this log entry is generated.
•
owner—Entry owner.
•
status—Entry status:
VALID—The entry is valid (default value).

UNDERCREATION—The entry is invalid.

The status field is not configurable at the CLI. All event log entries are valid by default.
The display rmon eventlog command can display invalid entries, but the display
current-configuration and display this commands do not display their settings.
Time when an event record was created:
•
entry-number—Event record index, represented as logEventIndex.logIndex, where
logEventIndex and logIndex are MIB objects. A record index uniquely identifies a
record among all records for the event.
•
created-time—Time when the event entry was created.
Record description.
217