Display Poe Pse Interface - HPE FlexNetwork 7500 Series Command Reference Manual

Field
Remaining Guaranteed Power
PSE CPLD Version
PSE Software Version
PSE Hardware Version
Legacy PD Detection
Power Utilization Threshold
PSE Power Policy
PD Power Policy
PD Disconnect-Detection Mode

display poe pse interface

Use display poe pse interface to display the PoE status of all PIs on a PSE.
Syntax
display poe pse pse-id interface
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
pse pse-id: Specifies a PSE ID. To display PSE ID and slot mappings, use the display poe device
command.
Usage guidelines
Only the default MDC supports this command.
Examples
# Display the status of all PIs on PSE 4.
<Sysname> display poe pse 4 interface
Interface
GE1/0/1
Power
GE1/0/2
GE1/0/3
GE1/0/4
Description
Remaining guaranteed power of the PSE = Maximum guaranteed
power of the PSE – Total maximum power of all critical PIs of the PSE.
PSE CPLD version number.
PSE software version number.
PSE hardware version number.
Nonstandard PD detection status:
•
•
PSE power alarm threshold.
PSE power management policy mode.
PD power management policy mode.
PD disconnection detection mode. This field is not supported in the
current software version.
PoE Priority
Enabled Low
Enabled Critical
Enabled Low
Enabled Critical
Enabled.
Disabled.
CurPower Oper
(W)
4.4 On
0.0 Power-lack
0.0 Power-deny
0.0 On
148
IEEE Detection
Class Status
1 Delivering
- Disabled
- Disabled
- Searching