Info-Center Logfile Frequency; Info-Center Logfile Overwrite-Protection - HPE FlexNetwork 7500 Series Command Reference Manual
Network management and monitoring
Hide thumbs
Also See for FlexNetwork 7500 Series:
- Security configuration manual (597 pages) ,
- Network management and monitoring command reference (430 pages) ,
- Command reference manual (376 pages)
Table of Contents
Advertisement
info-center logfile frequency
Use info-center logfile frequency to configure the interval at which the system saves logs from the
log file buffer to the log file.
Use undo info-center logfile frequency to restore the default.
Syntax
info-center logfile frequency freq-sec
undo info-center logfile frequency
Default
The log file saving interval is 86400 seconds.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
freq-sec: Specifies the log file saving interval in seconds. The value range is 1 to 86400.
Usage guidelines
This command enables the system to automatically save logs in the log file buffer to the log file at the
specified interval.
Examples
# Set the log file saving interval to 60000 seconds.
<Sysname> system-view
[Sysname] info-center logfile frequency 60000
Related commands
info-center logfile enable
info-center logfile overwrite-protection
Use info-center logfile overwrite-protection to enable log file overwrite-protection.
Use undo info-center logfile overwrite-protection to disable log file overwrite-protection.
Syntax
info-center logfile overwrite-protection [ all-port-powerdown ]
undo info-center logfile overwrite-protection
Default
Log file overwrite-protection is disabled.
Views
System view
Predefined user roles
network-admin
mdc-admin
391
Advertisement
Table of Contents
