Display Ip Netstream Template - HPE FlexNetwork 7500 Series Command Reference Manual

Field
Version 8 exported UDP datagram
number (failed)
Version 10 exported flow number
Version 10 exported UDP datagram
number (failed)

display ip netstream template

Use display ip netstream template to display NetStream template information.
Syntax
In standalone mode:
display ip netstream template [ slot slot-number ]
In IRF mode:
display ip netstream template [ chassis chassis-number slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
slot slot-number: Specifies a card by its slot number. If you do not specify a card, the command
displays NetStream template information for the active MPU. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The
chassis-number argument represents the member ID of the IRF member device. The slot-number
argument represents the slot number of the card. If you do not specify a card, this command displays
NetStream template information for the global active MPU. (In IRF mode.)
Usage guidelines
IP NetStream templates vary by aggregation mode. This command displays IP NetStream template
information for all the configured aggregation modes.
Examples
# Display NetStream template information.
<Sysname> display ip netstream template
Flow template refresh frequency
Flow template refresh interval
Active flow templates
Created flow templates
Protocol-port outbound template:
Template ID
Description
Number of UDP packets that are sent in version 8 format. The
field in the parentheses indicates the number of UDP packets that
failed to be sent.
Number of flows that are exported in version 10 format.
Number of UDP packets that are sent in version 10 format. The
field in the parentheses indicates the number of UDP packets that
failed to be sent.
: 20
: 30 min
: 2
: 2
: 3258
338