Vcf-Fabric Spine-Role Master - HPE FlexNetwork 7500 Series Command Reference Manual
Network management and monitoring
Hide thumbs
Also See for FlexNetwork 7500 Series:
- Security configuration manual (597 pages) ,
- Network management and monitoring command reference (430 pages) ,
- Command reference manual (376 pages)
Table of Contents
Advertisement
Predefined user roles
network-admin
mdc-admin
Parameters
access: Specifies the access node.
leaf: Specifies the leaf node.
spine: Specifies the spine node.
Usage guidelines
If you change the role of the device, the new role takes effect after the device restarts.
Examples
# Specify the device as a spine node.
<Sysname> system-view
[Sysname] vcf-fabric role spine
vcf-fabric spine-role master
Use vcf-fabric spine-role master to specify the device as a master spine node.
Use undo vcf-fabric spine-role master to restore the default.
Syntax
vcf-fabric spine-role master
undo vcf-fabric spine-role
Default
The device is not a master spine node.
Views
System view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
You must execute this command on a spine node.
When multiple spine nodes exist in the VCF fabric, you must specify a device as the master spine
node to collect the topology for the entire VCF fabric.
Examples
# Specify the device as a master spine.
<Sysname> system-view
[Sysname] vcf-fabric spine-role master
Related commands
vcf-fabric role
435
Advertisement
Table of Contents
