HPE FlexNetwork 7500 Series Command Reference Manual page 313

Predefined user roles
network-admin
mdc-admin
Parameters
dumbtty: Specifies dumbtty mode. In this mode, the command displays process statistics in
descending order of CPU usage without refreshing statistics. If you do not specify this keyword, the
command displays statistics for the top 10 processes in descending order of CPU usage in an
interactive mode, and refreshes statistics every 5 seconds by default.
iteration number: Specifies the number of display times, in the range of 1 to 4294967295. If you
specify the dumbtty keyword, the number argument is 1 by default. If neither the dumbtty keyword
nor the number argument is specified, there is no limit to the display times and process statistics are
refreshed every 5 seconds.
slot slot-number: Specifies a card by its slot number. If you do not specify this option, the command
displays process statistics for the active MPU.(In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The
chassis-number argument represents the member ID of the IRF member device. The slot-number
argument represents the slot number of the card. If you do not specify a card, this command displays
information for the global active MPU. (In IRF mode.)
cpu cpu-number: Specifies a CPU by its number.
Usage guidelines
If you do not specify the dumbtty keyword, the command displays process statistics in an interactive
mode. In this mode, the system automatically determines the number of displayed processes
according to the screen size, and does not display exceeding processes. You can also input
interactive commands as shown in
Table 72 Interactive commands
Commands
? or h
1
c
d
f
k
l
m
n
q
t
<
Table 72
Description
Displays help information that includes available interactive commands.
Displays state information for physical CPUs. For example, if you enter 1 for the first time,
the state of each physical CPU is displayed in a separate row. If you enter 1 again, the
average value of all CPU states is displayed. If you enter 1 for the third time, separate
states are displayed.
By default, the average value of all CPU states is displayed.
Sorts processes by CPU usage in descending order, which is the default setting.
Sets the interval for refreshing process statistics, in the range of 1 to 2147483647
seconds. The default value is 5 seconds.
Sorts processes by the number of open files in descending order. Files are identified by file
descriptors (FDs).
Kills a process. Because the command can impact system operation, be cautious to use it.
Refreshes the screen.
Sorts processes by memory usage in descending order.
Changes the maximum number of processes displayed within a screen, in the range of 0 to
2147483647. The default value is 10. A value of 0 means no limit. Only processes not
exceeding the screen size can be displayed.
Quits the interactive mode.
Sorts processes by running time in descending order.
Moves sort field to the next left column.
to perform relevant operations.
303