Sampler commands
display sampler
Use display sampler to display configuration information for a sampler.
Syntax
In standalone mode:
display sampler [ sampler-name ] [ slot slot-number ]
In IRF mode:
display sampler [ sampler-name ] [ chassis chassis-number slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
sampler-name: Specifies a sampler by its name, a case-insensitive string of 1 to 31 characters. If you
do not specify a sampler, this command displays configuration information for all samplers.
slot slot-number: Specifies a card by its slot number. If you do not specify a card, this command
displays sampler configuration information for the active MPU. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The
chassis-number argument represents the member ID of the IRF member device. The slot-number
argument represents the slot number of the card. If you do not specify a card, this command displays
sampler configuration information for the global active MPU. (In IRF mode.)
Examples
# Display the configuration information about sampler 256.
<Sysname> display sampler 256
Sampler name: 256
Mode: Fixed;
Table 76 Command output
Field
Sampler name
Mode
Packet-interval
IsNpower
Packet-interval: 8; IsNpower: Y
Description
Name of the sampler.
Sampling mode.
Sampling rate.
Whether the sampling rate is 2 to the nth power:
•
Y—Yes.
•
N—No.
316