Ipv6 Netstream Timeout Active - HPE FlexNetwork 7500 Series Command Reference Manual

peer-as: Records the ASs before and after the AS where the NetStream device resides as the
source AS and destination AS, respectively.
bgp-nexthop: Records BGP next hops.
Usage guidelines
Only one version format can take effect on the device. If you execute the ipv6 netstream export
version command multiple times, the most recent configuration takes effect.
An IPv6 NetStream entry records the source IPv6 address, destination IPv6 address, and two AS
numbers for each address. You can choose to configure which AS numbers are to be exported as
the source AS and destination AS.
In version 9 and version 10 formats, you can also choose whether to record the BGP next hop
information.
Examples
# Configure the device to export IPv6 NetStream data in the version 9 format, and specify the IPv6
NetStream data to include the source AS and destination AS.
<Sysname> system-view
[Sysname] ipv6 netstream export version 9 origin-as

ipv6 netstream timeout active

Use ipv6 netstream timeout active to set the aging timer for active flows.
Use undo ipv6 netstream timeout active to restore the default.
Syntax
ipv6 netstream timeout active minutes
undo ipv6 netstream timeout active
Default
The aging timer is 5 minutes for active flows.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
minutes: Sets the aging timer for active flows, in the range of 1 to 5 minutes.
Usage guidelines
A flow is considered active if packets for the IPv6 NetStream entry arrive before the timer set by this
command expires.
Examples
# Set the aging timer to 5 minutes for active flows.
<Sysname> system-view
[Sysname] ipv6 netstream timeout active 5
Related commands
ipv6 netstream timeout inactive
367