HPE FlexNetwork 7500 Series Command Reference Manual page 38

Failures due to timeout: 0
Failures due to internal error: 0
Failures due to other errors: 0
UDP-tracert results:
TTL Hop IP
1 3.1.1.1
2 4.1.1.1
Table 10 Command output
Field
Data collecting in progress
Send operation times
Receive response times
Min/Max/Average round trip time
Square-Sum of round trip time
Last succeeded probe time
Last packet received time
Packet loss ratio
Failures due to timeout
Failures due to disconnect
Failures due to no connection
Failures due to internal error
Failures due to other errors
Packets out of sequence
ICMP-jitter results
Packets arrived late
UDP-jitter results
Voice results
RTT number
Min positive SD
Min positive DS
Max positive SD
Max positive DS
Positive SD number
Time
2013-09-09 14:23:24.5
2013-09-09 14:23:24.5
Description
The operation is in progress.
Number of operations.
Number of response packets received.
Minimum/maximum/average round-trip time in milliseconds.
Square sum of round-trip time.
Time when the last successful probe was completed. If no probes
are successful in an operation, the field displays 0.
This field is not available for UDP jitter, path jitter, and voice
operations.
Time when the last response packet was received. If no response
packets in a probe were received, the field displays 0.
This field is available only for UDP jitter and voice operations.
Average packet loss ratio.
Number of timeout occurrences in an operation.
Number of disconnections by the peer.
Number of failures to connect with the peer.
Number of failures due to internal errors.
Failures due to other errors.
Number of failures due to out-of-sequence packets.
ICMP jitter operation results.
This field is available only for the ICMP jitter operation.
Number of response packets received after a probe times out.
UDP jitter operation results.
This field is available only for the UDP jitter operation.
Voice operation results.
This field is available only for the voice operation.
Number of response packets received.
Minimum positive jitter from source to destination.
Minimum positive jitter from destination to source.
Maximum positive jitter from source to destination.
Maximum positive jitter from destination to source.
Number of positive jitters from source to destination.
28