HPE FlexNetwork 7500 Series Command Reference Manual page 352
Network management and monitoring
Hide thumbs
Also See for FlexNetwork 7500 Series:
- Security configuration manual (597 pages) ,
- Network management and monitoring command reference (430 pages) ,
- Command reference manual (376 pages)
Table of Contents
Advertisement
Predefined user roles
network-admin
mdc-admin
Parameters
destination-prefix: Specifies the destination-prefix aggregation by destination AS number,
destination address mask length, destination prefix, and outbound interface index.
prefix: Specifies the source and destination prefix aggregation by the following criteria:
•
Source AS number.
•
Destination AS number.
•
Source address mask length.
•
Destination address mask length.
•
Source prefix.
•
Destination prefix.
•
Inbound interface index.
•
Outbound interface index.
prefix-port: Specifies the prefix-port aggregation by the following criteria:
•
Source prefix.
•
Destination prefix.
•
Source address mask length.
•
Destination address mask length.
•
ToS.
•
Protocol number.
•
Source port.
•
Destination port.
•
Inbound interface index.
•
Outbound interface index.
protocol-port: Specifies the protocol-port aggregation by protocol number, source port, and
destination port.
source-prefix: Specifies the source-prefix aggregation by source AS number, source address mask
length, source prefix, and inbound interface index.
tos-destination-prefix: Specifies the ToS-destination-prefix aggregation by ToS, destination AS
number, destination address mask length, destination prefix, and outbound interface index.
tos-prefix: Specifies the ToS-prefix aggregation by the following criteria:
•
ToS.
•
Source AS number.
•
Source prefix.
•
Source address mask length.
•
Destination AS number.
•
Destination address mask length.
•
Destination prefix.
•
Inbound interface index.
•
Outbound interface index.
342
Advertisement
Table of Contents
